View TSOP5038_7393922.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

document number: 81904 www.vishay.com rev. 1.2, 13-aug-09 1 ir receiver module for light barrier systems TSOP5038 vishay semiconductors mechanical data pinning: 1 = gnd, 2 = n.c., 3 = out, 4 = v s features ? low supply current ? photo detector and preamplifier in one package ? internal filter for 38 khz ir signals ? shielding against emi ? supply voltage: 2.7 v to 5.5 v ? visible light is suppressed by ir filter ? insensitive to supply voltage ripple and noise ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec description the TSOP5038 is a compact smd ir receiver for sensor applications. it has a high gain for ir signals at 38 khz. the detection level does not change when ambient light or strong ir signals are applied. it can receive continuous 38 khz signals or 38 khz bursts. block diagram application circuit 16797 1 2 3 4 parts table carrier frequency sensor applications 38 khz TSOP5038 33 k 1 4 3 v s out demo- g n d pass amp inp u t pi n band d u lator 16 8 33_9 c 1 ir recei v er g n d circ u it c r 1 + v s g n d v s v o 17170_ 8 out the external components r 1 and c 1 are optional to impro v e the ro bu stnes against electrical o v erstress (typical v al u es are r 1 = 100 , c 1 = 0.1 f). the o u tp u t v oltage v o sho u ld not b e p u lled do w n to a le v el b elo w 1 v b y the external circ u it. the capaciti v e load at the o u tp u t sho u ld b e less than 2 nf.
www.vishay.com document number: 81904 2 rev. 1.2, 13-aug-09 TSOP5038 vishay semiconductors ir receiver module for light barrier systems note (1) stresses beyond those listed under ?absolut e maximum ratings? may cause permanent damage to the device. this is a stress rating only and functional operation of the device at t hese or any other conditions beyond those i ndicated in the operational sections of t his specification is not implied. exposure to absolute maximum rating conditions for extended per iods may affect the device reliability. note (1) t amb = 25 c, unless otherwise specified typical characteristics t amb = 25 c, unless otherwise specified fig. 1 - output active low fig. 2 - pulse length and sensitivity in dark ambient absolute maximum ratings (1) parameter test condition symbol value unit supply voltage (pin 4) v s - 0.3 to + 6.0 v supply current (pin 4) i s 5ma output voltage (pin 3) v o - 0.3 to 5.5 v voltage at output to supply v s - v o - 0.3 to (v s + 0.3) v output current (pin 3) i o 5ma junction temperature t j 100 c storage temperature range t stg - 25 to + 85 c operating temperature range t amb - 25 to + 85 c power consumption t amb 85 c p tot 10 mw electrical and optical characteristics (1) parameter test condition symbol min. typ. max. unit supply current (pin 4) e v = 0, v s = 5 v i sd 0.65 0.85 1.05 ma e v = 40 klx, sunlight i sh 0.95 ma supply voltage v s 2.7 5.5 v transmission distance e v = 0, test signal see fig. 1, ir diode tsal6200, i f = 400 ma d30m output voltage low (pin 3) i osl = 0.5 ma, e e = 2 mw/m 2 , test signal see fig. 1 v osl 100 mv minimum irradiance pulse width tolerance: t pi - 5/f o < t po < t pi + 6/f o , test signal see fig. 1 e e min. 0.5 1 mw/m 2 maximum irradiance t pi - 5/f o < t po < t pi + 6/f o , test signal see fig. 1 e e max. 30 w/m 2 directivity angle of half transmission distance ? 1/2 50 deg e e t t pi * t * t pi 10/f 0 is recommended for optimal f u nction v o v oh v ol t 16110 optical test si g nal (ir diode tsal6200, i f = 0.4 a, 30 p u lses, f = f 0 , t = 10 ms) output si g nal t d 1) t po 2) 1) 7/f 0 < t d < 15/f 0 2) t pi - 5/f 0 < t po < t pi + 6/f 0 1 0.2 0.3 0.4 0.5 0.6 0.7 0. 8 0.9 0.1 1 10 10 2 10 3 10 4 10 5 e e - irradiance (m w /m2) t po - o u tp u t p u lse w idth (ms) 21391 inp u t b u rst length o u tp u t p u lse w idth = 950 nm, optical test signal, fig.1
document number: 81904 www.vishay.com rev. 1.2, 13-aug-09 3 TSOP5038 ir receiver module for light barrier systems vishay semiconductors fig. 3 - output function fig. 4 - output pulse diagram fig. 5 - frequency dependence of responsivity fig. 6 - sensitivity vs. supply voltage disturbances fig. 7 - sensitivity vs. el ectric field disturbances fig. 8 - sensitivity vs. ambient temperature e e t v o v oh v ol t 600 s 600 s t = 60 ms t on t off 94 8 134 optical test si g nal output si g nal , (see fig. 4) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0. 8 0.1 1 10 10 2 10 3 10 4 10 5 e e - irradiance (m w /m2) t on , t off - o u tp u t p u lse w idth (ms) 21392 = 950 nm, optical test signal, fig. 3 t on t off 0.0 0.2 0.4 0.6 0. 8 1.0 1.2 0.7 0.9 1.1 1.3 f/f 0 - relati v e fre qu ency 16925 f = f 0 5 % f(3 db) = f 0 /10 e /e - rel. responsi v ity e min. e 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0. 8 0.9 1 1 10 100 1000 v s rms - ac v oltage on dc s u pply v oltage (m v ) 21394 e e min. - threshold irradiance (m w /m2) f = f 0 f = 20 khz f = 30 khz f = 100 hz f = 10 khz 0 50 100 150 200 250 300 350 400 450 500 0 500 1000 1500 2000 2500 3000 f - emi fre qu ency (mhz) e - max. field strength ( v /m) 20747 0.3 0.35 0.4 0.45 0.5 0.55 0.6 0.65 0.7 - 30 - 10 10 30 50 70 90 t am b - am b ient temperat u re (c) e e min. - threshold irradiance (m w /m2) 21407
www.vishay.com document number: 81904 4 rev. 1.2, 13-aug-09 TSOP5038 vishay semiconductors ir receiver module for light barrier systems fig. 9 - relative spectral sensitivity vs. wavelength fig. 10 - horizontal directivity fig. 11 - sensitivity vs. supply voltage 0.0 0.2 0.4 0.6 0. 8 1.0 1.2 750 8 50 950 1050 1150 - w a v elength (nm) 16919 s ( ) - relati v e spectral sensiti v ity rel 16 8 01 0.4 0.2 0 0.2 0.4 0.6 0.6 0.9 0 30 10 20 40 50 60 70 8 0 1.0 0. 8 0.7 d rel - relati v e transmission distance 0.3 0.35 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0. 8 1.5 2.5 3.5 4.5 5.5 v s - s u pply v oltage ( v ) e e min. - sensiti v ity (m w /m2) 2140 8
document number: 81904 www.vishay.com rev. 1.2, 13-aug-09 5 TSOP5038 ir receiver module for light barrier systems vishay semiconductors package dimensions in millimeters assembly instructions reflow soldering ? reflow soldering must be done within 72 h while stored under a max. temper ature of 30 c, 60 % rh after opening the dry pack envelope ? set the furnace temperatures for pre-heating and heating in accordance with the reflow temperature profile as shown in the diagram. excercise extreme care to keep the maximum temperature below 260 c. the temperature shown in the profile means t he temperature at the device surface. since there is a temperature difference between the component and the circuit board, it should be verified that the temperature of the device is accurately being measured ? handling after reflow should be done only after the work surface has been cooled off manual soldering ? use a soldering iron of 25 w or less. adjust the temperature of the soldering iron below 300 c ? finish soldering within 3 s ? handle products only after the temperature has cooled off 2.35 r1.7 5.51 0.5 3 x 1.27 = 3. 8 1 2.6 7.5 0.5 7.2 4x 1 1.27 4 5.3 2.9 0.5 4 ? 2.2 pick and place area. tr taping 2.2 3 x 1.27 = 3. 8 1 1.27 0.9 2. 8 specifications according to di n technical dra w ings dra w ing- n o.: 6.544-5341.01-4 iss u e: 7; 23.03.09 16776 n ot indicated tolerances 0.3 pick and place area. tt taping footprint (1.5) (1.4)
www.vishay.com document number: 81904 6 rev. 1.2, 13-aug-09 TSOP5038 vishay semiconductors ir receiver module for light barrier systems vishay lead (pb)-free reflow solder profile taping version tsop..tt dimensions in millimeters 0 50 100 150 200 250 300 0 50 100 150 200 250 300 t (s) t (c) 255 c 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 20 s max. ramp up 3 c/s max. ramp do w n 6 c/s max. 2 cycles allo w ed 19 8 00 165 8 4
document number: 81904 www.vishay.com rev. 1.2, 13-aug-09 7 TSOP5038 ir receiver module for light barrier systems vishay semiconductors taping version tsop..tr dimensions in millimeters 165 8 5
www.vishay.com document number: 81904 8 rev. 1.2, 13-aug-09 TSOP5038 vishay semiconductors ir receiver module for light barrier systems reel dimensions in millimeters leader and trailer dimensions in millimeters cover tape peel strength according to din en 60286-3 0.1 n to 1.3 n 300 10 mm/min. 165 to 180 peel angle label standard bar code labels for finished goods the standard bar code labels are product labels and used for identification of goods. the finished goods are packed in final packing area. the standard pa cking units are labeled with standard bar code labels befor e transported as finished goods to warehouses. the labels are on each packing unit and contain vishay semicond uctor gmbh specific data. 16734 trailer leader no de v ices min. 200 min. 400 start end de v ices 96 11 8 1 8 no de v ices
document number: 81904 www.vishay.com rev. 1.2, 13-aug-09 9 TSOP5038 ir receiver module for light barrier systems vishay semiconductors dry packing the reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. final packing the sealed reel is packed into a cardboard box. a secondary cardboard box is used for shipping purposes. recommended method of storage dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. the following conditions should be observed, if dry boxes are not available: ? storage temperature 10 c to 30 c ? storage humidity 60 % rh max. after more than 72 h under these conditions moisture content will be too high for reflow soldering. in case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 c + 5 c/ - 0 c and < 5 % rh (dry air/nitrogen) or 96 h at 60 c + 5 c and < 5 % rh for all device containers or 24 h at 125 c + 5 c not suitable for reel or tubes. an eia jedec standard jesd22-a112 level 4 label is included on all dry bags. example of jesd22-a112 level 4 label vishay semiconductor gmbh standard bar code product label (finished goods) plain writting abbreviation length item-description - 18 item-number ino 8 selection-code sel 3 lot-/serial-number batch 10 data-code cod 3 (yww) plant-code ptc 2 quantity qty 8 accepted by acc - packed by pck - mixed code indicator mixed code - origin xxxxxxx+ company logo long bar code top type length item-number n 8 plant-code n 2 sequence-number x 3 quantity n 8 total length - 21 short bar code bottom type length selection-code x 3 data-code n 3 batch-number x 10 filter - 1 total length - 17 al u min u m b ag la b el reel 15973 16943
www.vishay.com document number: 81904 10 rev. 1.2, 13-aug-09 TSOP5038 vishay semiconductors ir receiver module for light barrier systems esd precaution proper storage and handling procedures should be followed to prevent esd damage to the devices especially when they are removed from the antistati c shielding bag. electro-static sensitive devices warning labels are on the packaging. vishay semiconductors standard bar code labels the vishay semiconductors standard bar code labels are printed at final packing areas. the labels are on each packing unit and contain vishay semiconductors specific data. 16962
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.

▲Up To Search▲

Price & Availability of TSOP5038

	To Download TSOP5038 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .